The Endurer

The KAD-150P cools large, open areas evenly and tirelessly: a 145-litre tank, 600 W power draw, LCD display, three power levels and automatic switch-over to ventilation when the tank runs dry.

Colour: White

€1,579

incl. VAT, plus €70 shippingDelivery time 3–6 working days

Fan speeds: 3 (H/M/L)
Power draw: 600 W
Water tank: 145 L
Noise level: 72 dB
Dimensions (W×D×H): 915 × 545 × 1.525 mm
Weight: 50 kg
Voltage: 220 V / 50 Hz

Guide

Ready to cool in a few steps.

Evaporative cooling takes a little know-how — here are the essentials for setup and care. Full details are in the manufacturer's manual.

Getting started

Fill with water

Fill the tank with clean, soft water through the inlet — the level window shows the fill. Always fill first, then switch on.

Switch on

Connect the unit to the mains and start it with the ON/OFF button. It first runs in pure ventilation mode.

Activate cooling

The cooling button starts the pump: water soaks the cooling pad and, after about a minute, noticeably cooler air flows out. The green light indicates cooling mode.

Set the airflow

Choose the fan speed, add the swing function for even distribution and set the timer if needed.

Care & maintenance

Safety first

Disconnect the mains plug before any maintenance.

Rinse the cooling pad and filter from the inside out every few weeks — no acids or harsh cleaners, at low water pressure.
Empty and rinse the water tank regularly to prevent deposits.
Before longer storage, empty the tank, run the unit dry for about ten minutes and store it dry.