Bestsellerup to 60 m²
KAD-50P
The Compact
The KAD-50P brings evaporative cooling to flats and offices: on castors, ready to go, with 6 fan speeds, swing function, UV light and infrared remote. LED display with temperature and water-level indicator, buzzer alarm when water runs low.
€679
incl. VAT, plus €50 shippingDelivery time 3–6 working days
1
- Operating modes
- 2
- Fan speeds
- 6
- Power draw
- 200 W
- Water tank
- 45 L
- Water consumption
- 6,5 L/h
- Noise level
- 62 dB
- Remote control
- ✓
- UV function
- ✓
- Swing function
- ✓
- Dimensions (W×D×H)
- 620 × 500 × 1.080 mm
- Weight
- 26 kg
- Voltage
- 220 V / 50 Hz
Guide
Ready to cool in a few steps.
Evaporative cooling takes a little know-how — here are the essentials for setup and care. Full details are in the manufacturer's manual.
Getting started
Fill with water
Fill the tank with clean, soft water through the inlet — the level window shows the fill. Always fill first, then switch on.
Switch on
Connect the unit to the mains and start it with the ON/OFF button. It first runs in pure ventilation mode.
Activate cooling
The cooling button starts the pump: water soaks the cooling pad and, after about a minute, noticeably cooler air flows out. The green light indicates cooling mode.
Set the airflow
Choose the fan speed, add the swing function for even distribution and set the timer if needed.
Care & maintenance
Safety first
Disconnect the mains plug before any maintenance.
- Rinse the cooling pad and filter from the inside out every few weeks — no acids or harsh cleaners, at low water pressure.
- Empty and rinse the water tank regularly to prevent deposits.
- Before longer storage, empty the tank, run the unit dry for about ten minutes and store it dry.
Full manual
Assembly, operation, fault codes and maintenance in detail — in the original manual as a PDF.
Download manual
PDF · KAD-50P
Not quite the right fit?
The other two sizes.
